Product Description

Aqua Shield Pro 007 is a two-component, polymer-modified, highly flexible cementitious waterproofing membrane designed for eco-friendly protection of concrete and mortar. It offers superior adhesion, flexibility, crack-bridging capabilities, and long-lasting durability. Aqua Shield Pro 007 is suitable for a wide range of applications, including marine structures, basement waterproofing, bathrooms, wet areas, swimming pools, roof waterproofing, and water tanks. It is also ideal for potable water retaining structures and drainage culverts.

Advantages

• Outstanding flexibility and elongation

• Excellent resistance to prolonged weathering, suitable for all climatic conditions

• Strong adhesion to both concrete and masonry

• No need for additional coatings

• Non-toxic and environmentally safe

• Safe for use with potable water

• Effective at bridging and sealing cracks

• Superior bonding strength

• Simple and easy application

• Perfect for damp proofing and ensuring long-lasting protection

Preparation of Surface

The surface must be clean, stable, and free from dust, loose particles, grease, oil, primers from previous membrane systems, or bitumen. Any bitumen or primer should be removed by cutting back to solid concrete and repaired with suitable repair mortars. Prochem Repairing Mortars from the patch series are ideal for this purpose. Cracks, holes, and honeycombs must be properly repaired as well. Ensure all surfaces are thoroughly repaired before application. For brick or block walls to be coated with Aqua Shield Pro 007 waterproofing, the brick joints should be evenly finished.

Preparation of Product

The Waterproofing Membrane is provided in pre-measured units. Gradually add the polymer powder to the liquid and mix using a slow-speed drill with a paddle attachment until a smooth, lump-free consistency is achieved. If necessary, water can be added up to 5% of the total mix. Avoid reworking any stiffened mixture by adding water. Only prepare as much as can be used within 30 to 60 minutes. In hotter climates, the working time may be shorter.

Application

Saturate the concrete surface with clean water. Apply the first coat while the surface is still damp, ensuring it is free from standing water. Use a short, stiff-bristle brush or roller to apply the coat at a thickness of 1-2mm, depending on the expected water pressure. Achieve the required thickness by applying 2 to 3 layers, ensuring each layer does not exceed 1mm. Allow the first coat to dry for 2 to 3 hours before applying the second coat. The second coat can be smoothed with a soft sponge. Spray or trowel application is also acceptable, provided the mixing ratio is adjusted to achieve the correct consistency.

Allow the final coat of Aqua Shield Pro 007 to cure overnight. Keep it moist for 3-4 days before conducting waterproofing flood tests. For hollow blocks or highly porous areas, it is recommended to apply a minimum of 3 to 4 coats, each at 1mm thickness.

Technical Sheet

Shelf Life

Expiration of Aqua Shield Pro 007 is at 12 months after production date under dry and sheltered conditions.

Packaging

Aqua Shield Pro 007 is available in:

3.2 KG pack size Part A – 1 KG Liquid Part B – 2.2 KG Powder

16 KG pack size Part A – 5 KG Liquid Part B – 11 KG Powder

Health & Safety

Aqua Shield Pro 007 is regarded as non-hazardous for transportation. Do not reuse bags or containers and dispose them off as per local rules and regulations. Gloves and suitable masks can be worn during application.

Please refer to the MSDS of the product for further health and safety information.

* Typical laboratory results